Chimney Chase Cover Replacement in St. Petersburg
Replace a failing metal top with a cover fitted to your chase.
- Fully licensed and insured
- Available for same-day service
- Locally owned and operated
- Family run
Get Your Free Estimate
Takes about 30 seconds
Request Received
Thank you. A member of our St. Petersburg team will call you to arrange the free inspection.
or call (727) 473-2732
Signs It Is Time to Call
Rust streaks or an opening at the top of a framed chimney chase can point to a failing cover. Our St. Petersburg chase cover replacement assesses the enclosure and the vent passing through it before a replacement is made. A durable result needs suitable dimensions, drainage and support beneath the metal.
- Rust running down the chase
- A visibly distorted broad metal top
- Water entering near a cover penetration
- Repeated sealant patches around the vent
What You Can Expect From Us
A chase cover replacement swaps the rusted or flat metal top of a framed chimney chase for a new, sloped cover. Each new top is sized to the chase and has a drip edge that keeps water off the siding. We reseal the storm collar around the flue pipe so water cannot follow the pipe down.
-
Family run
Local, family-owned attention for your chimney chase cover replacement project.
-
Honest pricing
Discuss the parts and labor involved in chimney chase cover replacement before authorizing the price.
-
Workmanship warranty
Repair workmanship comes with our workmanship warranty.
Jump to
Identify the Broad Metal Chase Top
A chase cover spans the enclosure around a manufactured chimney or vent system. It differs from the smaller termination above the vent. The phrases chimney chase cap and chase cap replacement sometimes describe this broad top, but the two components still need to be distinguished.
Chimney chase cover replacement must preserve the vent system’s required opening and relationship to the cover. The vent termination is not an interchangeable accessory, and the cover should not be used to force an unsuitable connection.
Fit the Cover to the Enclosure
A custom chase cover is sized for the actual top and its penetrations. Shape, edges and drainage details matter because a broad flat area can otherwise retain water. The selected attachment needs sound material beneath it.
A stainless steel chase cover can be considered where appropriate, but material choice alone does not correct an unsuitable shape or damaged support. The vent, cover and surrounding construction must work together.
Look Beneath Corroded Metal
Chase cover repair may suit a limited defect in a sound assembly. Widespread corrosion, distortion or repeated failed patches can make replacement more sensible. Any softened or deteriorated enclosure material below the cover needs its own response.
Cover replacement and chimney chase repair should appear as distinct tasks when damaged enclosure material is found. Replacing the visible metal while leaving damaged support untreated can hide a problem rather than resolve it.
If high wind lifts the top off a chase, our guide on a chase cover that blew off walks through the first checks. Water running down the flue pipe is explained in a leaking cap or storm collar.
What the Visit Covers
- Actual chase dimensions and penetrations
- Drainage and edge configuration
- Condition of the supporting enclosure
- Compatibility with the vent termination
10% off
Any Service You Book Within 72 Hours of Your Free Inspection
10% off any service you book within 72 hours of your free inspection.
Related Repairs We Also Handle
Other Work on the Same Chimney
Proudly American
Locally owned and operated in St. Petersburg, with free written estimates and no hidden fees.
Call Now (727) 473-2732Questions Homeowners Ask Before Booking
What is a chase cover on a chimney?
A chase cover is the metal top on a framed or factory-built chimney, sealing the wood or siding chase where the flue pipe comes through. The cover sheds rain off the chase and supports the storm collar and cap. A good one is sloped or crowned with a drip edge so water cannot pool and rust it through.
Is the chase cover the same as the vent cap?
No. The chase cover is the wide metal pan across the top of the chase. The cap is the smaller hooded piece on the flue pipe that sticks up through it, and each is sized and fastened for its own job. A new cover is often paired with a new storm collar so the joint around the pipe stays watertight.
What if the material under the cover is damaged?
Rotted plywood or wet framing under the chase cover is fixed first, then the new top goes on. A rusted cover usually leaks for a while before anyone notices, so the wood, siding and insulation below it often need checking. The technician probes the top of the chase during the visit and lists any framing repair separately on the estimate.
Does stainless steel remove the need for correct drainage?
No. Stainless steel resists rust, but a flat stainless cover still holds standing water against its seams and the storm collar. The cover needs a slope or cross break, an edge that drips clear of the siding and a tight fit over the chase. Those details decide how long the top stays dry, more than the metal alone.
Tell Us What the Chimney Is Doing
- Free inspection
- Written estimate before any work
- Family-owned local company
Get Your Free Estimate
Request Received
Thank you. A member of our St. Petersburg team will call you to arrange the free inspection.